Honda Spree and Elite 50 Forums

Are you running avgas? If your Temps don't stay low with jetting your compression is too high for the octane.

Regular gas
I need to do something if I want WOT for more than 10 seconds
Lower compression
Maybe find a cdi box with a curve
Water cooled head

Wow that's a lot of power you got there! I think they sell those water cooled heads on the taida site also. That should keep temps down. But gonna cost you to get all the goodies to go with.

I think youre stock cdi will probably be best for keeping temps cool. From what ive read its pretty retarded. I think your best bet for a timing solution would be to retard your stator plate.. Other options should come first. Maybe a 3 degree advance key installed backwards.

Water cooled head sounds nice if you get your hands on one let me know how much so i can order one as well for my 55mm bore

Id rather have my stroker then a 72 thats like having a goped or a cr 125 lol i rather have the cr because my bike is CRAZY but id just rather have the cooled head since 55mm bores dont come water cooled and i mite just upgrade to a 56mm bore so the head would be a plus imo

Of course stroker is more power spoon..just not daily driver.. you have a temp guage? What temps you seeing? And you know you will have to cut the block again if going to a 55/56 bore

Just trying to help too dude just want you know that..no hatin or nothin like that..we live in totally different climates so im sure things are different..just want to know what that pipe can do

Hes just gotta dial is it, but comparing cr to goped doesnt really work here. CR80/CR125 maybe. Even a CR80 is fun to ride.

No hard feelings dsd lol writing and talking you cant tell my expresions haha sorry if i sounded like a douch i really didnt mean too but my bike is a friday -sunday ride around the city type of deal , and dude this pipe was worth every single penny ! Steve was rite this pipe is the best 120cc + pipe and if its not its defenetly in the top 5

My bike was a 70cc about 3 years ago , bought the kit from moped hospital in florida , mhr aluminum bore with chrome technigas r pipe weights and some jetting , it was decent defenetly a reliable and good setup but then i went 125 stroker now i never wana hear about small motors again haha , but the again my bike is no were near a daily

I hear ya man good luck to all..the couple times i did open my stroker it scares the crap out of me lol..and moped hospital is around the corner,10 min drive. I wish i
Could post my vid of my ministroke vs a kx100 dirtbike! It was fun

I bought some 110 today, I'll test it this weekend to see how it helps with my high temps. Probably adjust my vario

I let my bike idle for 15 min today and it max around 337 with old last year 50:1 saber. I drained the tanks and ran the bowl dry then filled with 110 32:1 saber for five min and was around 20 degree lower. I tried taking it for a ride but it started raining so...

Excellent test. Cant wait to hear its performance results.

Gauge pics?