Page 6 of 16
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 2:44 am
by ragtop89
Same thing that kept my Aero 80 down Tjamz, a little tiny tiny bit of gunk, blocked my slow jet, EVEN though the jet was just put in, dirt must have come in the carb and settled in it.
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 7:28 am
by Trafficjamz
More confusion
http://www.hondaspree.net/phpBB3/viewto ... =4&t=22468
This scooter is truly a mix of interesting parts.
I am trying to figure out if this a polini corsa or contessa.
The head has the markings of a contessa........but the ex port is stamped with a SP (corsa)
Maybe the PO used the contessa head to lower the compression?
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 9:34 am
by jcivince
Just did a quick check and the PO hasn't visited the Board since 2009...
Sorry for the mish-mash!
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 10:24 am
by jcivince
Also want to say that I'm REALLY glad that tjams is the guy working on this!
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 4:13 pm
by jcivince
Trafficjamz - Please shoot me an address for shipping crank to - Thanks!!
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 4:14 pm
by jcivince
Also need to confer on bearings and seals.
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 11:00 pm
by Trafficjamz
jcivince wrote:Also need to confer on bearings and seals.
Does holland have a honda dealership?
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 11:30 pm
by eliteguy50
Trafficjamz wrote:jcivince wrote:Also need to confer on bearings and seals.
Does holland have a honda dealership?
What brand does Honda spec?
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 11:41 pm
by Trafficjamz
eliteguy50 wrote:Trafficjamz wrote:jcivince wrote:Also need to confer on bearings and seals.
Does holland have a honda dealership?
What brand does Honda spec?
Say what?
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 11:46 pm
by eliteguy50
What brand does honda spec for bearings? Koyo, NTN...
Re: Looking for Scooter Mechanic in Michigan
Posted: Wed Mar 14, 2012 11:52 pm
by Trafficjamz
eliteguy50 wrote:What brand does honda spec for bearings? Koyo, NTN...
NTN i think
Re: Looking for Scooter Mechanic in Michigan
Posted: Thu Mar 15, 2012 12:04 am
by eliteguy50
Do you know the number?
Re: Looking for Scooter Mechanic in Michigan
Posted: Thu Mar 15, 2012 3:49 pm
by jcivince
Just ordered/bought my crank bearings from Autotech on eBay.
Now I need to figure out what the crank seals are (Honda part number/s)...
Re: Looking for Scooter Mechanic in Michigan
Posted: Thu Mar 15, 2012 4:00 pm
by jcivince
And money sent to Red Eft Performance for the Malossi crank!
Definitely looking forward to running around on this thing!!!!!!
Re: Looking for Scooter Mechanic in Michigan
Posted: Thu Mar 15, 2012 4:05 pm
by Trafficjamz
Once I get all the parts, it should only take a couple days to put it all together.
Were you able to get ahold of VT cycles?
jcivince wrote:And money sent to Red Eft Performance for the Malossi crank!
Definitely looking forward to running around on this thing!!!!!!
I am looking forward to building it.
