Page 1 of 1
Spree vs. Razz drag race.
Posted: Sun Jul 12, 2009 9:35 pm
by gspreesea
Should be a close one right?
Re: Spree vs. Razz drag race.
Posted: Sun Jul 12, 2009 10:25 pm
by toboggan
My friends razz hits a top speed of about 32. And isn't the spree goof for 35 ish. But yes. it should be close.
Re: Spree vs. Razz drag race.
Posted: Sun Jul 12, 2009 10:46 pm
by scooterwerx
who can go slow faster?!?!?
i think the spree will have it. razz'z are SLOW, painfully so.
Re: Spree vs. Razz drag race.
Posted: Sun Jul 12, 2009 11:47 pm
by burnt_toast
spree would smoke up a razz no doubt, stock for stock
then try other combos:
spree w/ dio swap
razz w/ dio swap
razz w/ jog swap
to make things interestin

Re: Spree vs. Razz drag race.
Posted: Mon Jul 13, 2009 2:32 am
by scooterwerx
how about....
razz with vino 125 swap vs spree with dio swap? i have a razz frame with a vino 125 in it if anybody wants it, full tube chassis rear, all 1''x.065 4130 tube, tig welded, boxed shock mount, crazy awesome, just needs a vino front end and its ready to roll!
Re: Spree vs. Razz drag race.
Posted: Mon Jul 13, 2009 2:41 am
by eliteguy50
scooterwerx wrote:i have a razz frame with a vino 125 in it if anybody wants it,
Is this actually done? I have often wondered about something
like this but with the chain drive on the razz, I was curious how it would hold up with a added power.
I would think the chain drive would also count against the razz in this drag race.
Re: Spree vs. Razz drag race.
Posted: Mon Jul 13, 2009 11:07 am
by scooterwerx
it has been done, its the entire assembly from the vino
Re: Spree vs. Razz drag race.
Posted: Mon Jul 13, 2009 12:02 pm
by 808stalion
i had a razz that toped out at 45mph but thats with a after market pipe with the head shaved and ported bore
Re: Spree vs. Razz drag race.
Posted: Mon Jul 13, 2009 2:25 pm
by eliteguy50
scooterwerx wrote:it has been done, its the entire assembly from the vino
Cool, I can only imagine how great that would be, I hate how heavy my vino is but a razz...
808stalion wrote:i had a razz that toped out at 45mph but thats with a after market pipe with the head shaved and ported bore
This was more what I meant, with power on the stock drive train...How did it hold up?
Re: Spree vs. Razz drag race.
Posted: Mon Jul 13, 2009 3:40 pm
by 808stalion
it held up good alot of people was suprised about the razz going that speed its not fast but for the razz motor it was all good its still running good till this day and it was done about 2 years ago