Page 1 of 1
need a belt
Posted: Sun Sep 18, 2005 3:39 pm
by zoom
I need a belt cuase my old one borke and i dont want to pay 40 for a new one is ther an alternative i can get at like napa or auto zone . and what size would it be.
Posted: Sun Sep 18, 2005 9:08 pm
by burnt_toast
I believe you can, you just need to size it up right. Never done it, so I don't know the specifics.
Posted: Mon Sep 19, 2005 10:02 am
by noiseguy
NAPA can measure the length, make sure you get a "metric" belt so that the width is right.
Posted: Mon Sep 19, 2005 5:45 pm
by zoom
well see the thing is whenj i oped the case the belt was in a bunch of little peices. so do yall know what kind it is.
Posted: Mon Sep 19, 2005 11:16 pm
by burnt_toast
zoom wrote:well see the thing is whenj i oped the case the belt was in a bunch of little peices. so do yall know what kind it is.
well you can try to measure the clutch pulley in closed position, and front pulley in open position to get a good idea on what size the belt is. thats basically ur only other option, unless you get a stock belt.
Posted: Tue Sep 20, 2005 12:58 am
by noiseguy
It's around .4" wide, less than 1/2 inch, which is the common domestic size. Width is listed in the service manual.
Posted: Tue Sep 20, 2005 6:18 pm
by zoom
could you tell me that because i dont have a service manuel.
Posted: Wed Sep 21, 2005 12:25 pm
by noiseguy
Download it from tech docs.
Posted: Wed Sep 28, 2005 10:38 pm
by Mormonmopedmaifa
how much would a new belt cost at NAPA or another autostore?
Posted: Wed Sep 28, 2005 10:47 pm
by vette76
like 6-8