Air intake question
Posted: Wed Sep 30, 2009 9:15 pm
This is the gasket Honda makes for the intake. Why does it cover up some of the port? Will I get any more flow if I trim the gasket to just cover the edges of the opening?
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://hondaspree.net/hondaspree.net/phpBB3/
Air intake question
http://hondaspree.net/hondaspree.net/phpBB3/viewtopic.php?t=11626
Page 1 of 1
Re: Air intake question
Posted: Wed Sep 30, 2009 9:35 pm
All I know for sure is air intake...good....haha..ha.OK,I've got to fire my joke writers.If the gasket covers some of the fuel/air port,it would be a good thing to trim the excess that is in the way.Use an Exacto or utility knife.Carp
Re: Air intake question
Posted: Wed Sep 30, 2009 10:08 pm
I would second Carp . . .
Re: Air intake question
Posted: Wed Sep 30, 2009 11:02 pm
Greetings:
It won't make a bit of difference, sad to say.
Place the reed block on top and you'll see why.
It won't make a bit of difference, sad to say.
Place the reed block on top and you'll see why.