Page 1 of 1
elite manual
Posted: Fri Oct 21, 2005 10:34 am
by -aL-
there should be some elite manuals in the tech docs... i feel left out
Posted: Fri Oct 21, 2005 12:31 pm
by noiseguy
I need to get over to Derek's and borrow them... are you around this Sunday?
thnx
Posted: Fri Oct 21, 2005 2:15 pm
by -aL-
it would be a big help to me thanks
Posted: Fri Oct 21, 2005 3:49 pm
by noiseguy
We'll see if I hear back. In the meantime, the Aero 50 manual is pretty close.
Posted: Fri Oct 28, 2005 10:20 am
by gman75
I could use an elite manual too. for the '89 SB50 elite...
Greg
Posted: Mon Oct 31, 2005 10:14 am
by noiseguy
NQ50 (Spree) and SB50 (Elite 50) should have nearly (if not exactly) identical motors. If you find differences, I'd be interested in hearing what they are.
Posted: Mon Oct 31, 2005 11:29 am
by vette76
cases are a little different. (crank case covers are not interchangeable)
carb is a little different. (oiler injector is in carb as opposed to the intake tract.)
drive pulley is a little bigger in the sb.
Posted: Tue Nov 01, 2005 11:51 am
by gman75
Is that an improvement that the elite pulley is bigger than the spree's?
Posted: Tue Nov 01, 2005 12:43 pm
by noiseguy
I don't think the larger SB50 pulley will fit, based on description. You can get quite a bit out of the larger over-the-counter Spree part, with .10" milled from the face and a larger belt (which loses some ratio but helps the clutch work better.)
Posted: Tue Nov 01, 2005 2:28 pm
by vette76
no, it will not fit in the spree cases.