Page 1 of 1
clutch issue
Posted: Sat Apr 17, 2010 6:13 pm
by mrT
i've got an sb50 honda elite and the clutch weights are all worn down. Can i fix them? or where shud i buy new ones?
Re: clutch issue
Posted: Sun Apr 18, 2010 10:40 am
by Wheelman-111
Greetings:
You can measure the thickness of the pads accurately with an inexpensive digital caliper from Harbor Freight. 2mm thick is spec. The only place to go for OEM replacement is Honda. However an aftermarket clutch - if any fit the SB - may be both better and cheaper. Burnt_Toast was selling pretty-good Prodigy clutches - again, SB fit unknown, but someone here knows.
Re: clutch issue
Posted: Sun Apr 18, 2010 12:49 pm
by mrT
after a lot of time spent looking, i found one on dyg.com. it's like the only site i could find a reasonable price at. only 30 bucks.
Re: clutch issue
Posted: Sun Apr 18, 2010 4:12 pm
by Clivester
Here is one place you can get them discounted online.
http://www.cyclepartswarehouse.com/fich ... &fveh=3650
Only problem is shipping will be about $11 so not much of a savings vs your local Honda dealer.
The clutch shoes are fairly unique to this Elite model so nothing aftermarket that I know of.
Re: clutch issue
Posted: Mon Apr 19, 2010 4:47 pm
by mrT
Clivester wrote:Here is one place you can get them discounted online.
http://www.cyclepartswarehouse.com/fich ... &fveh=3650
Only problem is shipping will be about $11 so not much of a savings vs your local Honda dealer.
The clutch shoes are fairly unique to this Elite model so nothing aftermarket that I know of.
ya that's how much i got it for at that other site