Page 1 of 6
It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 9:26 pm
by Trafficjamz
10 am - got the 48mm kit today for my spree. OOOHHH pretty
I let spreetard do some port work on the jug this afternoon after I Magicsticked the head.
I put the 100 jet in the carb ,put the bbk on the scooter. fired it up at 8:15pm
It was very loud because I had not put the exhaust on yet
don't worry, I only ran it for two seconds at the most like that.
Has any one else got there 48mm bbks to fire up yet?
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 9:46 pm
by Trafficjamz
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 9:52 pm
by odinxxix
im just waiting to see what people will be getting out of this with the stock pulley set up. and if a bigger carb will eventually be needed.
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 9:54 pm
by oldrock
thanks for sharing the pics, looking good. Be sure to report back when you get a chance to do a road test. I am really curious how a spree performs with the BBK on it.
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 10:00 pm
by tazland001
Please ride it. I have not had time to build my engine yet. I am very anxious to here the results of the low end. I bet that kit sounded chunky. mohahahah
Taz
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 10:04 pm
by Trafficjamz
odinxxix wrote:im just waiting to see what people will be getting out of this with the stock pulley set up. and if a bigger carb will eventually be needed.
We just finished a 44mm bbk with gears and a slight pully mod. It's top speed is 42 mph, and has decent take off too.
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 10:09 pm
by Trafficjamz
tazland001 wrote:Please ride it. I have not had time to build my engine yet. I am very anxious to here the results of the low end. I bet that kit sounded chunky. mohahahah
Taz
Well this one has no gears or pully mod. So the low end should be great!
Can you say wheelie machine.
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 10:43 pm
by oldrock
with stock gearing, that one should really pull well off the line. I it has the low end to pull wheelies that would be sweet! We need some wheelie pics so the humble sprees start getting more respect around here
ps. just a heads up that I paypaled you shipping for that 84 spree crank gear.
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 10:47 pm
by martynkim
Good job, TJ! Keep us posted!
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 11:27 pm
by mustangwagz
SHAWEET!! wow the exhaust porting job was killer lookin! awesome job guys! Cant wait to hear what yinz have to share with us about the 48!!
I KNEW TJAM would be the first to install, ride and report. lol something told me he would!
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 11:31 pm
by martynkim
I KNEW TJAM would be the first to install, ride and report. lol something told me he would![/quote]
You didn't need a crystal ball or a magic stick to know that one!
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 11:33 pm
by mustangwagz
haha
Re: It's alive! My 48mm taz kit roars to life.
Posted: Tue Jun 08, 2010 11:36 pm
by Trafficjamz
martynkim wrote:
You didn't need a crystal ball or a magic stick to know that one!
I would have got it done sooner too, But I actually had to do some car audio stuff today too.
My custom car stereo shop is quickly becoming a custom scooter shop.
Re: It's alive! My 48mm taz kit roars to life.
Posted: Wed Jun 09, 2010 6:57 am
by toboggan
d***, that looks great. i like the port job too!
Re: It's alive! My 48mm taz kit roars to life.
Posted: Thu Jun 10, 2010 1:35 am
by tospreeornottospree
i better get the custom intake done for the 21mm so i can get the 48 goin you lucky sob play while your at work i hate my life lol
