Honda Spree and Elite 50 Forums

Hey guys,
I recently drilled some holes in my airbox and swapped the stock jet with an "85" jet. I am running the stock piston size. Anyone foresee any issues with doing this? I'm going to do some plug chops later on it and see how it looks, but I just want to make sure I'm not going to seize up my enigine!

Thanks

Plug chops are going to tell you everything, more so than anybody here will be able to. The jet and airbox mod sounds about right.

Why wait till later for the plug chops?

Go on a nice long ride to make sure you are fully warmed up. Go WOT(wide open throttle) until it reaches top speed, then hit the kill switch. Pull over and check the plug.

bradthreee wrote:Why wait till later for the plug chops?

Go on a nice long ride to make sure you are fully warmed up. Go WOT(wide open throttle) until it reaches top speed, then hit the kill switch. Pull over and check the plug.

take a socket w/ u to get it off...