Page 1 of 2
bore kite on the dio
Posted: Sat Jan 07, 2006 6:13 pm
by diomike
i have a 1997 dio sr [modle [sk50]. i want to put a 70cc bore kit on it would i need a need carb or jet?
if not wats the highest i can go with a stoke crab?
Re: bore kite on the dio
Posted: Sat Jan 07, 2006 7:45 pm
by hrnytrtlsgsxr
diomike wrote:i have a 1997 dio sr [modle [sk50]. i want to put a 70cc bore kit on it would i need a need carb or jet?
if not wats the highest i can go with a stoke crab?
you can just rejet the carb you have on now. I believe it is 100. But i would check if the kit you have already comes with a jet in it for the stock carb. if not you can check
http://www.vtcycles.com. J
Posted: Sat Jan 07, 2006 9:31 pm
by diomike
thnx man...
would u recomend a new pipe
Posted: Sat Jan 07, 2006 9:39 pm
by hrnytrtlsgsxr
diomike wrote:thnx man...
would u recomend a new pipe
yes i would, another site you can visit is
http://www.cycleimportshawaii.com.But for the best 68cc to 72cc pipe you can get is an arrow pipe. it's about $300 though. A PG long would suffice which is about $135+ shipping at VT cycles.
Posted: Sat Jan 07, 2006 10:02 pm
by 85stroka
Put a polini corsa or malossi alum.
Posted: Sat Jan 07, 2006 11:03 pm
by darat
Will a dio full circle crank fit my 87 elite?
Posted: Sun Jan 08, 2006 12:28 am
by diomike
i can get an aluminum bore kit or a regulaure stell off ebay both are same prise 175$. not sure wat to do.
Posted: Sun Jan 08, 2006 12:34 am
by 85stroka
post the link, I think the ones off ebay are so so,I know they sell polini contesa's but you want a corsa if you go polini.
Posted: Sun Jan 08, 2006 12:36 am
by 85stroka
Posted: Sun Jan 08, 2006 12:37 am
by diomike
the corsa is 225$ amarican and i would get free shiping..
i live in montreal canada
Posted: Sun Jan 08, 2006 12:40 am
by diomike
it is a straight bolt up right .
Posted: Sun Jan 08, 2006 12:41 am
by 85stroka
I think they go for 200 here?
Posted: Sun Jan 08, 2006 12:46 am
by diomike
is the last link as goood as the corta. iam trying to get a good deal so i can do all the s*** i want to my dio.
Posted: Sun Jan 08, 2006 1:15 am
by hrnytrtlsgsxr
diomike wrote:is the last link as goood as the corta. iam trying to get a good deal so i can do all the s... i want to my dio.
no it's not. the only thing IMO thhat was better was a malossi single ring which they don't make anymore. or you could try a fabrizzi aluminum. Either way it will cost you some money. Corsas would be the best bet espacially if you just want to bolt up and go.
Posted: Sun Jan 08, 2006 3:09 pm
by 85stroka
[quote="hrnytrtlsgsxr"][quote="diomike"]is the last link as goood as the corta. iam trying to get a good deal so i can do all the s... i want to my dio.[/quote]no it's not. the only thing IMO thhat was better was a malossi single ring which they don't make anymore. or you could try a fabrizzi aluminum. Either way it will cost you some money. Corsas would be the best bet espacially if you just want to bolt up and go.[/quote]
Indeed
