Honda Spree and Elite 50 Forums

Hello, I recently purchased a 94 Elite SR (SA50) and I'd like to order a headlight modulator from Kisan. I know that the modulator model I need to order is for 12V AC scooters. I have an option of 3 adaptors for the modulator: 1) 3-Pin for H4 bulbs, 2) 2-Pin for H7 Euro bulbs, or 3) 2-Pin for HB8 or HB9 bulbs. Which is right for the 94 Elite?

Which bulb does your scooter have? That would be the right one.

The scoot isn't with me (it's 50 miles away at in-laws' house), so I can't take off the back handlebar cover and look. I was hoping someone on the forum would know. If not, I'll wait until I pick it up next week.

BobbyD wrote:Hello, I recently purchased a 94 Elite SR (SA50) and I'd like to order a headlight modulator from Kisan. I know that the modulator model I need to order is for 12V AC scooters. I have an option of 3 adaptors for the modulator: 1) 3-Pin for H4 bulbs, 2) 2-Pin for H7 Euro bulbs, or 3) 2-Pin for HB8 or HB9 bulbs. Which is right for the 94 Elite?

A 94 elite has a 3 prong plug.

Thank you Traffic Jamz.

Kisan P115W-AC

I know it's an old post I'm just adding part number and link for those that search later as I did.

Kisan Electronics P115W-AC

Edit: I ordered one of these only to find out they have been discontinued. Salesman said he is sending a different unit that "may" work. Once I get it sorted out I will post which unit he decided to send and what I had to do to get it working.

Well I finally had a chance to get the modulator wired up and working. I took it for a test drive in the neighborhood and didn't make it two blocks before some had really "noticed" me by the way they gripped the wheel and pulled over as far as they could towards the curb on their side. I'm most certainly sold on this whole idea. Later tonight I will post pics showing what you need tool wise, and what I changed to get it working.