Honda Spree and Elite 50 Forums

hey i have a 1989 honda elite sb50p and a variator out of a 87 elite se50p i wama put it into my 89 elite . what stock roller weights are in that and what ones should i get to get faster speed and not trash my axceleration i weigh about 235lbs for the clutch a want to get a new center spring and new grab springs but what rpm ones shoud i get to get going good and faster andf have good exel
.thanks alot

are you using 87 elite 50 motor in your elite E?

no sb50p stock motor

bakaracer wrote:are you using 87 elite 50 motor in your elite E?

To my knowledge, you are substituting a restricted variator for another restricted one. I was certain the P in the model number were the restricted ones released by Honda to keep it at 25-30 for the moped laws in some states. I believe the variator backplate for these are flat and do not allow the belt to hit top gear.

I would just get a keli variator that comes with weights... 9g I think. But if you have the P model, then you have other restrictions as well.

what restrictions does my sb50p have

ktroy wrote:To my knowledge, you are substituting a restricted variator for another restricted one. I was certain the P in the model number were the restricted ones released by Honda to keep it at 25-30 for the moped laws in some states. I believe the variator backplate for these are flat and do not allow the belt to hit top gear.

I would just get a keli variator that comes with weights... 9g I think. But if you have the P model, then you have other restrictions as well.

Read about it on this forum. It's all over on how to de-restrict them. Top of my head its the variator, exhaust pipe, oil pump cable (or lack thereof), and a main jet in the carb. May be more but I think that is the bulk of them.

Or maybe its not restricted anymore. How fast does it go on a flat?

spewya wrote:what restrictions does my sb50p have

There is no variator on an elite e

That is the main restriction.

get the taz 44mm bbk and up gears

so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks.

Portugal6 wrote:so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks.

The spree engine makes under 3hp stock.

There is nothing you can do to ADD 10-15 HP for free.

Greetings:

Quoth Portugal6:

so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks

I sense this just might be a Troll. OK, I'll bite:
Can I get Flash to hang with my buddies' Hayabusas? I'd prefer not to have to adjust anything, including my mirrors. They're set just so right now.
On a related note, maybe you can help me convert my Family Truckster into a Bugatti Veyron? Without opening the hood?

Portugal6 wrote:so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks.

Oh yes ....I almost forgot you can buy wheelman's POWERBAND for your spree. Easy 15-20mph faster in the 1/8th mile.

the acme products also work great for the spree.

I have a 25hp Nitrous kit on my Drag scooter.... never used more than the 15hp nozzles... mostly the 10hp
I sure wouldnt try it on a stock motor

ya there isnt a vairitor on it but i wana try and put 1 frome a se50p but i heard i cant , is that true. an how muh is a 44mm bbk and gaers.. and lower in the post some1 said get a powerband for 15-20 mph . what is that

Trafficjamz wrote:

spewya wrote:what restrictions does my sb50p have

There is no variator on an elite e

That is the main restriction.

get the taz 44mm bbk and up gears

o ya it goes 30-32 on flat and i weigh 250

spewya wrote:ya there isnt a vairitor on it but i wana try and put 1 frome a se50p but i heard i cant , is that true. an how muh is a 44mm bbk and gaers.. and lower in the post some1 said get a powerband for 15-20 mph . what is that

Trafficjamz wrote:

spewya wrote:what restrictions does my sb50p have

There is no variator on an elite e

That is the main restriction.

get the taz 44mm bbk and up gears

Irrelevant question, but what do you have a 4 stroke motor for your avatar?

These would be better.