Page 1 of 1

is this true????????

Posted: Sat Oct 02, 2010 10:26 pm
by spewya
i have a honda elite 89 sb50p if i get a 3 inch back tire and a #75 main jet will it make my moped go faster

Re: is this true????????

Posted: Sat Oct 02, 2010 10:42 pm
by Trafficjamz
The bigger tire will add 2-3 mph on the top end

the bigger jet will do nothing but make your scooter run rich.

Re: is this true????????

Posted: Sat Oct 02, 2010 10:59 pm
by Spreetard
A bigger tire will increase yor top speed by simply changing the final drive ratio. A bigger tire goes further per revolution.

The jetting... well that would depend on the air/fuel ratio. Chances are, if all you do is change the jet, it will run too rich, go slower, and foul plugs faster. But hey, at least it'll do something faster. :|

There is no magic trick. There is no free power. While I'm at it, I better let you in on the fact that there is no Easter Bunny. And your parents were the tooth fairy.

Re: is this true????????

Posted: Sat Oct 02, 2010 11:28 pm
by tospreeornottospree
hmm i guess i was to slow to read the read other posts :eyeroll: dont forget there is no santa! :naughty:

Re: is this true????????

Posted: Sat Oct 02, 2010 11:34 pm
by martynkim
easy now guys, kids are on this forum too! :smile:

Re: is this true????????

Posted: Sun Oct 03, 2010 9:40 pm
by spewya
what is the biggest size tire i can get for the sb50p with out haveing rubbing issues. and do i get just the rear or bigger front and rear

Re: is this true????????

Posted: Mon Oct 04, 2010 2:26 pm
by eliteguy50
spewya wrote:what is the biggest size tire i can get for the sb50p with out haveing rubbing issues. and do i get just the rear or bigger front and rear
bigger rear tire at 2.75x10. the bigger front will increase ride quality a little and bring the speedo closer to being right but it will not increase the performance. Some have claimed that a 3x10 will not rub but it depends on the tire brand and model.

Re: is this true????????

Posted: Mon Oct 04, 2010 3:23 pm
by spewya
what brand can any body sugjest for the 3.00 wide
eliteguy50 wrote:
spewya wrote:what is the biggest size tire i can get for the sb50p with out haveing rubbing issues. and do i get just the rear or bigger front and rear
bigger rear tire at 2.75x10. the bigger front will increase ride quality a little and bring the speedo closer to being right but it will not increase the performance. Some have claimed that a 3x10 will not rub but it depends on the tire brand and model.

Re: is this true????????

Posted: Sat Oct 09, 2010 4:12 pm
by spewya
what brand tire can i get that is 3.00 wide that wont rub
spewya wrote:what brand can any body sugjest for the 3.00 wide
eliteguy50 wrote:
spewya wrote:what is the biggest size tire i can get for the sb50p with out haveing rubbing issues. and do i get just the rear or bigger front and rear
bigger rear tire at 2.75x10. the bigger front will increase ride quality a little and bring the speedo closer to being right but it will not increase the performance. Some have claimed that a 3x10 will not rub but it depends on the tire brand and model.

Re: is this true????????

Posted: Sat Oct 09, 2010 5:54 pm
by eliteguy50
I have yet to find the right one but other members have claimed no problems with theirs. I'd try a search for spree and 3.0 tires.

Re: is this true????????

Posted: Sun Oct 10, 2010 12:48 am
by SPREEtown
on my spree the 3" conti zipp had clearance issues w/ the center stand and one of the exhaust mounting bolts. seems like they flare out quite a bit at the tread.

Re: is this true????????

Posted: Sun Oct 10, 2010 1:46 am
by spewya
ya i wana get 1 but i dont want problems wen i get it
SPREEtown wrote:on my spree the 3" conti zipp had clearance issues w/ the center stand and one of the exhaust mounting bolts. seems like they flare out quite a bit at the tread.

Re: is this true????????

Posted: Sun Oct 10, 2010 1:48 am
by eliteguy50
SPREEtown wrote:on my spree the 3" conti zipp had clearance issues w/ the center stand and one of the exhaust mounting bolts. seems like they flare out quite a bit at the tread.
And they will expand as you ride so check them throughout the first few rides.

Re: is this true????????

Posted: Sun Oct 10, 2010 1:57 am
by SPREEtown
if i did it again i would get 2.75in tires. i imagine much of my grief/grinding would not have been necessary. but the zipps at 3in look sick. ur choice bro, the bigger u go the higher gearing u get as well.