Honda Spree and Elite 50 Forums

My friend just picked up a 1996 yamaha jog for $400

He wants it to go very fast.


What parts should we buy for it?

Are there stroker kits for the jog?

I am new to the jogs and do not know where to start.

is it going to be used for drag racing or daily rider?

bakaracer wrote:is it going to be used for drag racing or daily rider?

He wants to be faster than superman. 11.38 seconds in the 1/8th mile

But he will want to drive it around town too if I know him.

So sorta street racer setup i guess

how much is he willing to spend is the next question?

bakaracer wrote:how much is he willing to spend is the next question?

Maybe $500-$800

goto spmptostore and look around in there. anything thats says horizontal minarelli will work.get a good exhaust as thats the key for those engines to make good power. the good exhaust for those engines run about $350 and up

BBK, pipe, carb, vari... Similar to setting up a dio to race but the Minarelli has an even larger aftermarket. The Minarelli is a real rev happy engine. smaller carbs seem to work better on the Minarelli, more like 19-21 on this for a BBK. The best thing going for it is that you have a Japan made Jog, not a Taiwan made Jog. I don't know if it extends back to the Japan made Minarelli engines (I've never had a problem either way) but it is said that the Taiwan Minarelli engines need a crank replacement if you plan to run over 10k RPMs (race built engines can exceed 14k on a Minarelli).

it is not worth it to buy taiwan stroker jog kit, just like throw money in the drain!

Just add polini crank, corsa, small carb can use stock intake, and polini gear..

Somewhat on topic

http://www.scootertherapy.com/dragjogpage.html

I have a 97 jog.

I run the 47mm race kit from here - http://www.strokeitimports.com/stroke%2 ... 20home.htm
The guy ported/polished it for me for about 30-40$ extra. Great work, awesome performance.
I also have the LeoVince ZX pipe, Jog 90 belt, Stock crank, 19mm arreche carb with a 95 main jet, unifilter.


I hit ~60mph+ (Havnt topped it out yet)

Where can I find gears for this yamaha jog?

veedubh20 wrote: and polini gear..

Where can this be found?

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 613wt_1163
Is this pipe for a 1996 jog?

Is this pipe ok too loud for street use?

Trafficjamz wrote:http://cgi.ebay.com/ebaymotors/ws/eBayI ... 613wt_1163
Is this pipe for a 1996 jog?

Is this pipe ok too loud for street use?

Looks like it. With out the part number I can't tell you 100% sure. If the sellers description is accurate, it is the correct pipe.

Not too loud for the street at all. It is a good budget pipe. Your top RPM will bump up higher and be more peaky than your stock motor. If you want a power increase with a broad power band, the Leo Vince TT is slightly cheaper than the ZX and is not as peaky.

Trafficjamz wrote:http://cgi.ebay.com/ebaymotors/ws/eBayI ... 613wt_1163
Is this pipe for a 1996 jog?

Is this pipe ok too loud for street use?

dont mess with that pipe. get a good pipe for your jog. knowing you ,you will want it to go faster.that pipe will limit you to only 8.5hp max. thats with a top performance mid race kit. find yourself a yasuni c16,c20,c21 or stage6 pro or r1200 pipe. the yasuni with a mid race kit will make around 13hp.more than enough to go 70mph with a 70cc kit setup.