Superman -vs- Kryptonite 125cc stroker battle (new videos)

[Trafficjamz]

Superman -vs- Kryptonite 1/8 th mile dragrace 2011


Most of the parts have arrived
Both setups will be 125cc full strokers

We will race in May I can hardly wait.

[Trafficjamz]

This space is reserved for pictures of the 125cc build (superman)

some pics from summer 2010





Some progress was made today.

[Trafficjamz]

Kryptonite Build

The Kryptonite build starts with an elite S frame with the neck shortened to accept elite e front forks.

Also, to try to reduce wheelies, a stretch is being added to the frame.
Here are a few pics for all to enjoy.

That is one loooong S

Cutting the cover so the world can see the ZX Tranz Setup ,Prodigy Clutch and Vented Bell




More 125cc goodies: New scorpion pipe, 33mm Carb, Big Black intake (Thanks Tru72)








This is the stretch E from summer 2010

[spree-rider]

JEsus christ!

[fastplastic]

ppl do call me many things lol......

[Trafficjamz]

for new pics

[mousewheels]

I'd never think I'd root for both Superman and Kryptonite, but you guys are 'n. Best for 2011 and keep having fun!

How you can be building in MI, whilst' my scooter activity is hibernating I've got to figure out. Especially when Bear is still active

[Bear45-70]

I actually rode down to the Post Office the other day. But it was just because I was working on the new 125 and had to move the Aero 80 outside. So when the sun came out, I made the run.

[kryptonite]

Yup Yup

along with the 7" frame strech im also doing an engine strech, not sure how long yet. I have my first strech E that was 10" total (frame and engine) and that worked well on 82cc, but we are adding 40+cc so im thinkin longer than 10"

I am workin closely with Darin (Tru72) on getting more parts for the 125cc engine, im not saying youll have to wait and check the pics

so thats all for now, keep smiling
-Ben

[burnt_toast]

looks like some good stuff, can't wait to see more

[Trafficjamz]

The cases are at the machine shop now. I can hardly wait.

[bradthreee]

[Trafficjamz]

I sanded down this set of case bearings today so that they drop right in the case and slide on and off the crank,with no pressing required.




They will come in handy for test fitting cranks, with out having to actually press the bearings or pull the crank through with the TUSK tool.

I will bring them to the machine shop tomorrow to help test fit the new 52.6mm stroker setup.

[KillinSpree]

Hey *trafficjamz* wheres that drag stripe at in mich you run at? All i know of is milan. I may come up one time to run my 1000 when you guys go.

[Trafficjamz]

Hey *trafficjamz* wheres that drag stripe at in mich you run at? All i know of is milan. I may come up one time to run my 1000 when you guys go.

http://northernmichigandragway.net/

http://www.mapquest.com/directions?form ... -86.020749