Page 1 of 1
Idle Set Screw On Carb 86 Spree
Posted: Thu Mar 17, 2011 9:20 am
by thadpk
The issue I am having is that the idle set screw apparently does not seat tight as when the spree is rode the vibrations turn this screw. If I remember correctly there is supposed to be a rubber washer type around this screw. Any ideas on how to fix this?
Re: Idle Set Screw On Carb 86 Spree
Posted: Thu Mar 17, 2011 12:29 pm
by bc117
not sure about a rubber piece but there should be a spring that puts pressure on the screw
Re: Idle Set Screw On Carb 86 Spree
Posted: Thu Mar 17, 2011 3:21 pm
by Bear45-70
bc117 is correct the spring holds the mixture screw in place. And you can NOT buy the spring separate from the screw.
SCREW SET B 16028-GC8-004 about $12.00
Re: Idle Set Screw On Carb 86 Spree
Posted: Thu Mar 17, 2011 9:05 pm
by thadpk
Thanks Bear, looks like I will be buying a set then as the spring is incognito
Re: Idle Set Screw On Carb 86 Spree
Posted: Fri Mar 18, 2011 12:39 am
by Bear45-70
You might be able to find a spring of the right size at the hardware store.
Re: Idle Set Screw On Carb 86 Spree
Posted: Fri Mar 18, 2011 8:25 am
by thadpk
Great idea! I will check that today