Page 1 of 1
Spree exhaust
Posted: Mon Mar 28, 2011 6:40 am
by mgracer
My 84 Spree pit bike got dumped and the exhaust seems to be plugged or highly restricted. Is there a problem if I cut it open, clean and remove everything inside then weld it back up? When I took it off and shook it, there was quite a rattle coming from inside.
It is only used as a pit bike, not on the street
Re: Spree exhaust
Posted: Mon Mar 28, 2011 11:45 pm
by bc117
you probly knocked the baffles loose, if you can find a foot long drill bit you can slide it in through the rear and drill the baffles out
Re: Spree exhaust
Posted: Tue Mar 29, 2011 12:05 am
by Bear45-70
bc117 wrote:you probly knocked the baffles loose, if you can find a foot long drill bit you can slide it in through the rear and drill the baffles out
How do you drill the baffles if they are knocked lose?
I would suspect that he knocked loose a bunch of carbon build up in the muffler rather than the baffles.
Try this to cure it.
http://hondaspree.net/wiki/index.php5?t ... r_Cleaning