Honda Spree and Elite 50 Forums

I have a 1987 spree, the engine was completely rebuilt, new seals, new gasket, new bearing and a 44mm kit.
I cleaned the carb replace the jet with the one from the kit.
I also drilled some holes on my air box and changed the air filter
The scooter idle good but has no power from 0 to 25 km and then it runs better.
Too much gas coming in? Is the jet too big? is that why it runs better when it goes faster?
The jet included in the kit was a 100
I tried a 80 and it's way better
I will test a 85 check the plug and then determine witch one is the best..


thanks

Plug the holes in the air box.

I tried it with the 100 jet and it still did the same thing, witch jet should I use?