83 areo build and lots of questions...
Posted: Wed Aug 10, 2011 12:21 am
well first thing is first... i bought an 83 nb50 for 50 dollars. everything was there but not in the best shape motor has around 450 miles on it (speedo cable snapped). i got it no running so i tore it apart everything looked well motor wise. i through a new plug in it and fired it up after 20-30 kicks... the electric start "clicked" for awhile then stopped. it never started. but now starts with a kick everytime... well the cable to run oil pump was broke so i just decided to tear out the oil pump and put a plug there. i made my plug with the washers bolt and rtv black. hold up fine after 50 miles i put on it before i decided to tear everything apart again. i fabbed up and made a woodgrain floor deck then covered it in black grip tape... since all the plastics are cracked and messed up or missing i wanted to try a some what naked look... i want this to be street legal( all turn signal headlight works) and i wanna keep them in working order but im not digging all the cracked up fearings so.... im gonna start my questions now... then a build will fallow...by the way the motor is completely stock besides the oil plug...
1. where can i buy speed cable...
2. any way i can put an aftermarket headlight in it? like just a small led one? will it wire right up or will i have to hardwire to battery and a switch?
3. my bystarter is garbage. did an ohm test... can i just remove this or what are my options with this? its unplugged now and my scooter runs/starts fine.
4. what are my options as far as tires... right now it has a pit bike offroad tire on it lol... previous owner said its all he had lol..
5. she tops out at 36mph right now... what are some things i can do to get like up to 40.
any opinion and suggested is much appreciated. thanks guys i look forward to becoming an active member on here.
1. where can i buy speed cable...
2. any way i can put an aftermarket headlight in it? like just a small led one? will it wire right up or will i have to hardwire to battery and a switch?
3. my bystarter is garbage. did an ohm test... can i just remove this or what are my options with this? its unplugged now and my scooter runs/starts fine.
4. what are my options as far as tires... right now it has a pit bike offroad tire on it lol... previous owner said its all he had lol..
5. she tops out at 36mph right now... what are some things i can do to get like up to 40.
any opinion and suggested is much appreciated. thanks guys i look forward to becoming an active member on here.