Page 1 of 1
problems
Posted: Mon Apr 03, 2006 9:03 pm
by Mike
my airbox tube is nicely sealed around the carburetor but it still bogs out SOMETIMES. it is still getting too much air. i sealed alot of the air box so i dont know what else to do. please help me out
Posted: Tue Apr 04, 2006 10:36 am
by noiseguy
Is the heat insulator (plastic bit b/t the carb and manifold) in the right way? Orings should not be touching, make sure it's not upside down and not sealing.
Posted: Tue Apr 04, 2006 2:44 pm
by Mike
i have brand new o rings and insulator. the insulator IS on the right way. what do you mean when you say the o rings should not be touching?
Posted: Tue Apr 04, 2006 5:12 pm
by MySpree
the o ring should ber faceing the manifold... and how ur bystarter sealing?
Posted: Tue Apr 04, 2006 7:08 pm
by Mike
o okay then yeah the insulator is on the right way. i have new o rings on the bystarer too. in fact all the carb o rings are new i just replaced them.
Posted: Tue Apr 04, 2006 9:49 pm
by MySpree
maby there is a hole in the airbox someware...
Posted: Tue Apr 04, 2006 10:00 pm
by darat
or u have a cracked carb?
Posted: Wed Apr 05, 2006 10:16 am
by MySpree
or ur intake is leaking were it mounts onto the base
Posted: Wed Apr 05, 2006 2:58 pm
by Mike
MySpree wrote:or ur intake is leaking were it mounts onto the base
i have that sealed. im gonna try and figure whats up with it today
Posted: Wed Apr 05, 2006 3:30 pm
by MySpree
is your oil line on?
Posted: Wed Apr 05, 2006 4:20 pm
by Mike
i found a nice new vacuum tube with a VERY tight fit and now itst working alot better so the spree is good to go. thanks guys.
Posted: Wed Apr 05, 2006 5:37 pm
by MySpree
good to hear