Stretching my 86 spree

This is the place to post your scooter builds; everything from stock Spree restoration to water-cooled drag bikes.

Moderator: Moderator

Post Reply
mark.nichols18
BMX
BMX
Posts: 41
Joined: Fri Sep 09, 2011 12:48 pm
Location: georgia

Stretching my 86 spree

Post by mark.nichols18 »

Im in the process of strething my 86 honda spree i just got the motor off and im taking the frame to the weld Shop monday to add a 6 in spacer to boltmthe motor to ill be posting pictures and all advise and comments are welcome
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: Stretching my 86 spree

Post by swimmingfree »

were are you adding 6 in ?? floor?? when doing you have a lot of work new longer cable wires that have to be mod and the flood .. i wood love to see photo my self !!!! this is not a job that will only take lots of time but money .. you may save money buy finding a moped scrap yard by you to find the cable and other thing ..
good luck
post lots of photo
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
mark.nichols18
BMX
BMX
Posts: 41
Joined: Fri Sep 09, 2011 12:48 pm
Location: georgia

Re: Stretching my 86 spree

Post by mark.nichols18 »

Haha well ive messured everything and i have enough room for everything i just need longer fuel lines which is easy to find and im dropping the handle bars about 3 inches which will give me more room and i took it to a weld shop that everyone who works there ride harleys and they looked at it. And laughed for a second but all told me that they want to ride it when it is done when i get it back i will show all the pictures and the route im taking i promise you it will be cheap and easy
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: Stretching my 86 spree

Post by swimmingfree »

well ive done some thing like that and to tell you the truth ive have though about it as well .. im not a tall guy 5 foot 7 and when riding my spree im sitting on the far back of the set and fell like a frog about to jump.. so i may steel some of your info ...

here a job i did to a QT50 so im not saying this with out Knowing what im talking about.. one peace of info is put it together ride it make sure ever thing works .. before you spend time making it look good..
swimmingfree

Image
By freeswimming at 2011-06-21
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
mark.nichols18
BMX
BMX
Posts: 41
Joined: Fri Sep 09, 2011 12:48 pm
Location: georgia

Re: Stretching my 86 spree

Post by mark.nichols18 »

Dude that looks so bad ace man i just found someone that has a spree and want to get rid of it and im gunna make that a serious project like droping a 50 cc 4 gear pitmbike motor in it and stretch it like 12 inches and my a 50cc chopper haha
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: Stretching my 86 spree

Post by swimmingfree »

you taking a big job and making huge job ... better to walk first then run this was not the first thing ive done .. i have done lots of bikessssssss and some car stuff and help on other stuff ... lot of people start thing and never finish then... not saying your going to do that .. its not a simpull as what they show on TV .. your talking a lot of work and going were no one can tell you who to... i wood save that for when your done with this one..
yes its done
swimmingfree

dyslexia haha lol lol
Image
By freeswimming at 2011-06-21
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Post Reply