Honda Spree and Elite 50 Forums

some of you may remember me from my spree which has given me endless problems till i eventually got it going only for it to s*** out again.

well i brought another spree and it started first go every time, it ran really rough as though the engine wasnt balanced.

so i replaced starter engine on my new spree and it started first pop. then it had this crap black panel on where the horn is, so i got my red panel off my old scooter and replaced it. Now it wont start! and when u use indicator it beeps with every flash of indicator.

so i swaped them back and now it wont start and its doing the beep thing for the orignal horn. Help i wish id never touched it! they are so temperamental

something is definatly not hooked up right... somehow its hooked up to your blinker

good news i got one of the bikes started bt its still doing blinkers and horn in tandem sound. starting problem appeared to be spark plug.

i know that sumwhere the wires must be joining and mixing currents, but it just doesnt make sense how originally i didnt have a problem until i replaced the horns.

also how can i screw this up when there are only three plugs for the horn and they are colour coded! surely someone else must have had this issue

had it all i did was take all the wires out and tryed again. both blinker wires should be in the same green ground thingy th ehor has its own.