ch150 wheels
Posted: Thu Feb 16, 2012 9:11 pm
Anyone Know if a gy6 wheel will fit on a ch150? Or any other wheel for that mater. the ch150 must have the ugliest wheels ever put on a scoot.
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://fastfoamfilter.com/hondaspree.net/phpBB3/
ch150 wheels
http://fastfoamfilter.com/hondaspree.net/phpBB3/viewtopic.php?t=22190
Page 1 of 1
Re: ch150 wheels
Posted: Thu Feb 16, 2012 11:17 pm
I have the same wheel on '84 Aero 125...cast alloy, 2-piece...they are a bit homely...the Elite 150 of '87 shows in the Identification Guide to have steel 1-piece wheels, unlike '85 &'86. The best answer is to find specs in a parts fiche / maybe ?...If you need Elite 80 wheel measurments, I have a pair off the bike...
Re: ch150 wheels
Posted: Fri Feb 17, 2012 12:14 am
.....No luck trying to match up wheels via parts fiche-ing....
Re: ch150 wheels
Posted: Fri Feb 17, 2012 3:06 am
Cross reference the brake shoe part number, that will give you a list of bikes to get measurements from. Check with aftermarket companies too.
Re: ch150 wheels
Posted: Fri Feb 17, 2012 12:01 pm
thanks guys the search continues.
Re: ch150 wheels
Posted: Mon Feb 20, 2012 11:42 pm
I happen to know someone selling a 100% custom set of (aluminum?) rims that fits the Aero 80, Aero 125, Elite 80, Elite 125 and Elite 150. The front rim requires a disc brake conversion which is the hard part, but awesome if you do it. The rear rim is bolt in. Being a 3 piece, you'd need tubes.