Honda Spree and Elite 50 Forums

What is the best 50cc exhaust for the vertical dio? Looking for acceleration from a dead stop so nothing that is a spree until 20mph and then kicks. Looking for the quickest pickup. Stock intake too.

Is the Goshi pipe the best for this?

eliteguy50 wrote:What is the best 50cc exhaust for the vertical dio? Looking for acceleration from a dead stop so nothing that is a spree until 20mph and then kicks. Looking for the quickest pickup. Stock intake too.

Is the Goshi pipe the best for this?

Okumura!!!!!! The mid is crazy!

eliteguy50 wrote:What is the best 50cc exhaust for the vertical dio? Looking for acceleration from a dead stop so nothing that is a spree until 20mph and then kicks. Looking for the quickest pickup. Stock intake too.

Is the Goshi pipe the best for this?

Yeah the stock goshi is the best for that.

Thanks. I doubt I will find one in the short run but I have added it to the watch list. I should stay away from the scorpion, right? It is a peaky pipe.

A derestricted dd50 exhaust is nice. You
have to cut off the restrictors and weld the holes
Up

eliteguy50 wrote:Thanks. I doubt I will find one in the short run but I have added it to the watch list. I should stay away from the scorpion, right? It is a peaky pipe.

You can't use a scorpion on a 50cc. Its to much pipe. The stock elite s pipe deresticted is good to. The sr pipe if you don't want to grind the washer out.

The Okumura is the golden stock pipe!

bakaracer wrote:

eliteguy50 wrote:Thanks. I doubt I will find one in the short run but I have added it to the watch list. I should stay away from the scorpion, right? It is a peaky pipe.

You can't use a scorpion on a 50cc. Its to much pipe. The stock elite s pipe deresticted is good to. The sr pipe if you don't want to grind the washer out.

What cc do they start at?

KingJeff801 wrote:The Okumura is the golden stock pipe!

Are there different sizes or just buy any one that says vertical dio?

The scorpion is for 72cc-90cc. The okumura just look for the one that's for the vertical dio. It only came in one size.

bakaracer wrote:The scorpion is for 72cc-90cc. The okumura just look for the one that's for the vertical dio. It only came in one size.

Thanks for clarifying.