Page 1 of 1
SB50p questions!
Posted: Sat Mar 10, 2012 10:50 pm
by bjdipert269
I was wondering how to get a little more speed out of my 89 elite. The muffler is derestricted and it has an aftermarket CDI and coil. I was curious about clutch springs and tension springs and variator weights. I am new to this so i would appreciate any input. Thx everybody.
Re: SB50p questions!
Posted: Sat Mar 10, 2012 10:57 pm
by Trafficjamz
the sb50 has no variator or aftermarket clutch springs.
The sb50 is basically just a spree engine
bbk and gears are available from TAZ
Re: SB50p questions!
Posted: Sun Mar 11, 2012 9:59 am
by Dio89Elite
bjdipert269 welcome to the foums 
the sb50's that were sold in the usa didn't come with variators
so that limits choices for those wanting to chase after higher mph ratings
a big bore kit (bbk) and gears will help you get a few more mph
others have gone the route of transplanting the SA50 engine into the SB50 frame
this engine swap isn't a quick bolt in but the effort is well worth it since
the SB50 engines have a lot of aftermarket go fast goodies
Re: SB50p questions!
Posted: Sun Mar 11, 2012 4:28 pm
by eliteguy50
You can bolt on an sb50 top end and pipe for a 5 mph increase.