Page 1 of 1
INTERMITENLY WORKING TURN SIGNALS ON SB50P
Posted: Sat Apr 21, 2012 10:10 pm
by larryhobman
I SUSPECT I HAVE A BAD RELAY. IS THERE ANY WAY TO REPAIR THE ONE THAT I HAVE, I SEE IT IS CONNECTED TO THE SPEDO IN THE BOOK.
Re: INTERMITENLY WORKING TURN SIGNALS ON SB50P
Posted: Sat Apr 21, 2012 10:13 pm
by Dio89Elite
It could be that, but be sure to check on other things as well.
Check the wiring from end to end, there may be a fray somewhere causing a short every now and then.
My first thought is to check the battery connections, a loose ground would cause intermittent problems too.
Good luck! and let us know what you find. 
Unsure of repairing the unit, perhaps some the others with more technical expertise will be able to help...
Re: INTERMITENLY WORKING TURN SIGNALS ON SB50P
Posted: Sat Apr 21, 2012 10:29 pm
by Bear45-70
When doesn't it work?
Re: INTERMITENLY WORKING TURN SIGNALS ON SB50P
Posted: Sun Apr 22, 2012 10:37 am
by yurself
Mine used to stop working when I applied the brakes. The battery didn't have enough juice to support the signals and brake light when the engine slowed down. I got a new battery and that fixed my problem.
Re: INTERMITENLY WORKING TURN SIGNALS ON SB50P
Posted: Thu Nov 14, 2013 8:25 pm
by larryhobman
Thanks all for the responses. I cleaned the relay contacts and put in a new battery and it works good now.
Re: INTERMITENLY WORKING TURN SIGNALS ON SB50P
Posted: Thu Nov 14, 2013 10:52 pm
by paulpauly7
Re: INTERMITENLY WORKING TURN SIGNALS ON SB50P
Posted: Fri Nov 15, 2013 1:09 pm
by ClemSpree
...and put a battery in it, cmon...
He for sure could have put a dio in it in that time
I give him credit for following up on a repair thread, most just disappear like a fart in the wind
