Honda Spree and Elite 50 Forums

So I tested that spree muffler I just bought and d*** that really works. I was actually very surprised with the results. It gained an easy 6-7mph on the top end. My son runs the 48mm with a 24mm crab. He would hit about 37-38mph. Put the pipe on and he buried the speedo. I got on it and it buried the speedo. I am very impressed for a change.

Taz

-would this be the Spree performance muffler you and I were talking about, Taz?-

-j

so how meany more rpms did you pick up???
are you going to try it on a stock spree??
i wood like to see that sharp 90 degree that is close to the jug gone ...
swimmingfree

How does the rest of the rpm range respond? Is this going to be usable as a daily rider or just a race pipe?

eliteguy50 wrote:How does the rest of the rpm range respond? Is this going to be usable as a daily rider or just a race pipe?

+1 on eliteguy50 is the pipe to loud for neighborhood riding or is it alright?

I wasnt lieing when I said it really opened the top end up.... Glad you enjoy it

No force you were not lying. It really does work.

Actually the pipe is not that loud at all. If you compare it to a the dio performance pipes it would be considered quit. lol

And yes ghost this would be the pipe we talked about. Thanks again for the info

I would not hesitate to use this for a daily rider.

Well as far as the bend close to the exhaust manifold it does not hinder performance so that is no longer an issue.

I am not sure on the RPM's but I can tell you this pipe is tuned for the spree and works very well on the mid and top.

I have not tested this on a stock engine but like force said it works. On the 41mm stock jug I am sure it would loose bottom end but would hit hard on the mid and top.

Taz

well when can the cloning begin? and how much is it going to cost us???

in!

That's one plus to a side bleed pipe. They tend to be quieter than normal exhaust.

i would like to buy this but i want to properly jet my dang scooter first!! haha
and when did you make this 24mm carb?!

I guess I'll have to buy this too haha

jokim00 wrote:i would like to buy this but i want to properly jet my dang scooter first!! haha
and when did you make this 24mm carb?!

I guess I'll have to buy this too haha

he sells them on ebay http://www.ebay.com/itm/Honda-Spree-NQ5 ... _500wt_925

or you can pm him

thanks abreen89
i didnt know he started selling a 24mm carb until last night.
i didnt see any updates from taz so i figured he maintained the 21mm carb.

i'll be sure to buy it soon but we'll see...im having the hardest time tuning the spree with this 21mm carb.
it's killing me

taz no longer sells the 21mm only the 24mm the bigger you go the harder it will be to tune im usin and 18mm alot better throttle control

ah is that how it works? lol
i didn't know much and just bought the parts from taz but seeing as how you said it's harder to tune bigger carbs, we'll see...

and sorry taz, i wasn't hijacking your thread

if i can get this 21mm carb tuned, i'll be so happy. and get confidence to maybe buy the 24mm carb (: