Honda Spree and Elite 50 Forums

Does any1 happen to have a spare flywheel puller for 94-01 honda elite sa50? or does any1 know of any way to remove the flywheel without puller or know how to make one myself if not....IM IN DESPRITE NEED BECUZ MY CRANK BEARINGS NEED CHANGED AND I CAN GET TO EM!!

I just use this:
http://www.harborfreight.com/46-piece-b ... 37824.html

Only $13 at HF right now (before coupons).

Greetings:

I used that exact set to split the cases prepping for Flash 5 in Builds.
However as a flywheel puller it's a bit wobbly and tricky to set up. Great Risk of threading the M6 bolts too far into the flywheel and buggering up the Stator. Rocky Mountain Sports sells the 24mm R-Hand thread puller for Honda and many others; Screw on, Couple of twists on the bolt and POP. With the steering wheel puller: Proceed with caution.

Got it! With Steering Wheel Puller!! Thanks!!!