Honda Spree and Elite 50 Forums

I have a Honda Urban Express Moped and I finally got it running but it needs a few bolts to keep the exhaust and airbox on. The photos show which bolts I need. If anyone knows the sizes of these bolts please post or if you are selling these bolts please post.

One option is Honda - look thru your favorite on-line Honda Dealer parts fiche and with a little patience, you can find most, if not all of those bolts (on average, about $0.60 each). If you have a good local dealer, they can usually get them overnight if not in stock.

I believe it will also tell you the size of each in parts description.

For example:

http://www.servicehondapsn.com/fiche_se ... veh=131163

Those are just standard metric bolts, home depot might have what you need. The mount for the pipe I think is an 8 mm diam. if I can get at my express when I get home later tonight I'll measure mine for you. Look up on the parts diagram it may tell you the size bolt and yo can go get one for a few cents. The air box lid should be 4mm most of that stuff is. Allen head machine screws would work well for that, just take the air box with you to match up. A lot of auto parts places have the big bolt bins too. Make sure to pick up some washers with the bolts. The pipe mount bolt may or may not have a spacer, the regular express has a spacer. And the end of the pipe to fender is 6mm i think

Sent from my Nexus 7 using Tapatalk 2

If you can find something like this at your local hardware store or the like you will save a ton of headache.
http://www.princessauto.com/pal/en/Misc ... /8092199.p
I always have one of those bolt kits around saves a ton of pain. And I went to my local fastener supplier and got a ton of the common sizes of metric bolts in varying lengths and tons of washers and all different styles of nuts for the different diameters so I have a collection of standard nuts, nylock nuts and some cap nuts that fit on my spree aero and express. 20$ on fasteners goes a long way. I even keep a bunch of different bolts washers and nuts in the tool bags of all my scooters so I can replace something that could fall off and leave me stranded like a carb bolt on a spree, cause I lost one last year and a made it home somehow with luck after tightening the one bolt just so and it diddnt leak... That bad. So having bolts helps

Sent from my Nexus 7 using Tapatalk 2

breaze wrote:One option is Honda - look thru your favorite on-line Honda Dealer parts fiche and with a little patience, you can find most, if not all of those bolts (on average, about $0.60 each). If you have a good local dealer, they can usually get them overnight if not in stock.

I believe it will also tell you the size of each in parts description.

For example:

http://www.servicehondapsn.com/fiche_se ... veh=131163

So I tried your idea with looking up the parts and it worked great except I still can't find this one bolt.

Unless it is part 14 http://www.cmsnl.com/honda-nu50-urban-e ... ml#results

Its a 6mm bolt. if your are searching on OEM parts diagrams its in the rear fender and tail light

Sent from my Nexus 7 using Tapatalk 2

Thanks everyone for the help I know what to get now.