Page 1 of 1
1985 Honda NQ50 Spree Bystarter Questions
Posted: Wed Jul 19, 2006 1:29 pm
by 70JUDGE
Does anyone know if these come apart,and how?Mine looks good,and I believe it works,except for the brass pieces missing,and what they hook onto inside.I have a chance to get one with cut wires,and was going to use it for parts to fix mine with the good wires.Please let me know!
Thank You very much!
Tyler
Bystarter teardown
Posted: Wed Jul 19, 2006 4:05 pm
by bigbaer
Here's a link to the teardown in the Technical Documents area of this forum. Pretty much all of our "newbie" questions can be found in there and by searching the forum, with a minimal amount of digging. Good luck
http://www.hondaspree.net/phpBB/viewtopic.php?t=1504
Posted: Sat Jul 22, 2006 1:58 am
by 70JUDGE
Thank You for the help!I tried taking mine apart,but I couldn't.Which way does is unscrew?The document doesn't say.I don't want to break it!Thank You very much!
Tyler
Posted: Sat Jul 22, 2006 4:31 pm
by jbarb
Hold the base with the needle facing you and turn the peice with the o ring counter clockwise. Lefty loosy. I had to use pliers on mine, it was really on there.