Honda Spree and Elite 50 Forums

Posted: **Tue Oct 01, 2013 4:31 pm**

thought I had it but when I was done there was still one hose not hooked up. I have labeled all the connections can someone help me figure out what goes to where? thanks in advance for your help.

Posted: **Tue Oct 01, 2013 4:48 pm**

A is gas
B is vacuum
C is oil injection out
D is oil from tank (G)
E is vacuum from (B)
F is oil from (C)
G is oil tank out to (D)

Vent goes to nothing but don't cap it off
it needs vented to atmosphere.

Posted: **Tue Oct 01, 2013 4:57 pm**

thank you for the fast response.

Posted: **Tue Oct 01, 2013 5:00 pm**

Trafficjamz wrote:A is gas
B is vacuum
C is oil injection out
D is oil from tank (G)
E is vacuum from (B)
F is oil from (C)
G is oil tank out to (D)

Vent goes to nothing but don't cap it off
it needs vented to atmosphere.

I dont think F is oil from C. I think F is fuel from A.
And I think "vent" is where the oil pump feeds to the carb so C goes to "vent"

Posted: **Tue Oct 01, 2013 5:30 pm**

Oops I'm wrong.
Bfowler is right.

Sorry.

Posted: **Tue Oct 01, 2013 5:32 pm**

thanks bfowler, not a problem TJ.

Posted: **Tue Oct 01, 2013 7:10 pm**

Let me know if you need a hand I will be around this weekend.

Posted: **Tue Oct 01, 2013 7:28 pm**

martynkim wrote:Let me know if you need a hand I will be around this weekend.

k sounds good. i might need some spree stuff too. plastic wise.

Honda Spree and Elite 50 Forums

hooking up fuel and oil lines on a spree/dio swap.

hooking up fuel and oil lines on a spree/dio swap.

Re: hooking up lines on a spree/dio swap.

Re: hooking up fuel and oil lines on a spree/dio swap.

Re: hooking up lines on a spree/dio swap.

Re: hooking up fuel and oil lines on a spree/dio swap.

Re: hooking up fuel and oil lines on a spree/dio swap.

Re: hooking up fuel and oil lines on a spree/dio swap.

Re: hooking up fuel and oil lines on a spree/dio swap.