Page 1 of 1
silicon rtv selant
Posted: Wed Apr 02, 2014 2:12 pm
by Crash
can i use this for my cases?
Re: silicon rtv selant
Posted: Wed Apr 02, 2014 2:24 pm
by Crash
i kno ppl have used rtv selant for putting the cases back together i just now noticed it is silicon rtv i have
Re: silicon rtv selant
Posted: Wed Apr 02, 2014 2:34 pm
by Crash
well i talked with afew ppl and they say its all pretty much the same thing just b cautious what kinda solvents come into contact with it so i guess ima cross my fingers and hope i get a good seal
Re: silicon rtv selant
Posted: Wed Apr 02, 2014 8:31 pm
by Wheelman-111
Greetings:
For the $15 or so you'd spend at Honda-san's why would you risk a poor seal, an air leak, and fried bore and/or crank? Honda-Bond - or Yama-Bond if there's no dealer handy. Surely this can be purchased online too. Get the Right Stuff, dude.
Re: silicon rtv selant
Posted: Wed Apr 02, 2014 10:56 pm
by bonesv
Seems this is hard to find at the dealership so I get it here;
http://www.rockymountainatvmc.com/p/302 ... ndabond-HT
They also have other gasket sealers and specialty tools.
Re: silicon rtv selant
Posted: Thu Apr 03, 2014 12:23 pm
by Crash
yes you are prolly right seein as im kinda broke now that is not a option atm. i did get a secussefull seal i guess ill check it perodically cause of the concern. i should be working again soon and considering a mini stroke set up that would b a good time to change it thank you for the feedback