My Nifty 50 tidy up from nz
Posted: Wed Apr 02, 2014 5:41 pm
Hey guys i recently bought a nifty fifty of my mate and its seen better days
my plans are to tidy up as much as i can and maybe hot up the motor a little.
so i have made it my side project, i have stripped it down completely (apart from the motor) and found that the frame was split almost completely in half just above where the motor/rear wheel pivots. so i've since welded it up and painted the frame.
i've done a little reading and mines a 1986 with the round headlight (not the usdm/canada spec one)
I'll upload some pictures soon
i have a few questions if anyone can help me out.
1 where is the best place to buy body covers (if you can buy them)?
2 will the body covers (apart from the 2 handle bar covers) from a usdm/canada one be the same as my jdm/nzdm ones?
any help would be much appreciated
Thanks
my plans are to tidy up as much as i can and maybe hot up the motor a little.
so i have made it my side project, i have stripped it down completely (apart from the motor) and found that the frame was split almost completely in half just above where the motor/rear wheel pivots. so i've since welded it up and painted the frame.
i've done a little reading and mines a 1986 with the round headlight (not the usdm/canada spec one)
I'll upload some pictures soon
i have a few questions if anyone can help me out.
1 where is the best place to buy body covers (if you can buy them)?
2 will the body covers (apart from the 2 handle bar covers) from a usdm/canada one be the same as my jdm/nzdm ones?
any help would be much appreciated
Thanks