kill switch

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

kill switch

Post by vette76 »

wheere do the kill switch wires come out by the engine? my spree wont turn off by the on/off switch or the ign. because the ign doesnt belong in it.
User avatar
waltz
Noob
Noob
Posts: 10
Joined: Fri Nov 26, 2004 11:27 pm

Post by waltz »

Maybe I can help you for a change.

We had another Spree that wouldn't shut off unless we bounced up and down on the seat - SWEAR TO GOD!! Finally that wouldn't work, either and we traced wires. There is a plastic block wire connector with about 6 wires going in and out of it back on the right side under the seat by the rear fender. One of those wires is the kill ground wire. It had come undone (broke). We fixed it and it stops on demand now. Might not be your problem, but just my experience. Check it out.

Later.
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

thanks i will.
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

never mind. one of the wires got cut.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
Post Reply