1986 Spree Carb. assembly
Posted: Thu Apr 05, 2007 6:51 pm
I was wondering if it makes any difference where you line up the holes in the brass tube under the jet in the carb. I took it all apart and cleaned it and blew everything out with air hose and this tube blew out. It is about 1 inch long with all these tiny holes in it...........there two sides oposite each other with 2 holes and then 2 sides with 3 holes oposite each other. Does it make a difference where I aligin these holes when installing this tube back into the carb?.......... thanks, Ed