Page 1 of 1
What jet should I use??
Posted: Mon May 10, 2021 6:42 pm
by Rezzin Bawl
I have an '85 spree and recently ordered the mlm side bleed pipe and polini cp 15mm carb. I feel I should re-jet the carb straight away. If this is true, what size jets should I use?
Re: What jet should I use??
Posted: Mon May 10, 2021 9:53 pm
by motormike
I can't tell you the jet size.
The important step is to take time to do plug-chops and adjust according to the results.
Re: What jet should I use??
Posted: Tue May 11, 2021 6:59 pm
by Rezzin Bawl
motormike wrote: Mon May 10, 2021 9:53 pm
I can't tell you the jet size.
The important step is to take time to do plug-chops and adjust according to the results.
Ok thanks, as soon as I receive the carb and throw that on I'll for sure do that. I only ask because with the stock carb it's recommended to upjet with the mlm pipe. So I wasn't sure if it was needed with the new carb.
Re: What jet should I use??
Posted: Tue May 11, 2021 10:42 pm
by motormike
Nobody knows what size jet size is in that new carb.
Re: What jet should I use??
Posted: Sat Oct 26, 2024 7:15 pm
by Bear45-70
A 15mm carb is 2mm SMALLER than the stock carb which is a bad move on a Spree. Go back to original carb.
Re: What jet should I use??
Posted: Sat Oct 26, 2024 7:16 pm
by Bear45-70
Oops, Double post.