Page 1 of 1
wiring help
Posted: Wed Sep 19, 2007 9:35 pm
by dumdum9599
hello all i need to know what to hock up to make my 84 spree fire. i should mention that it only has the puls coil wiers and the stator wirers left any help would be good.
Posted: Wed Sep 19, 2007 11:27 pm
by wikked_spree57
You have to have a way to connect the CDI box and coil, not sure if you need anything else. The CDI and coil will produce your spark at the plug.
Posted: Thu Sep 20, 2007 7:41 am
by dumdum9599
that is what i thought but which coil the puls coil or the spark plug coil.
Posted: Thu Sep 20, 2007 4:21 pm
by dumdum9599
but i thought there could be a way around using the cdi.
Posted: Fri Sep 21, 2007 3:45 pm
by dumdum9599
isn't there a way to hock up a different type of ignition. like say a coil from a car.
Posted: Fri Sep 21, 2007 4:00 pm
by Kenny_McCormic
it uses a very small ignition coil along with the cdi and pickup
Posted: Fri Sep 21, 2007 7:26 pm
by dumdum9599
ok i found my cdi box and am now just trying to figure out the wirring. in the diagram i am reading i can't tell which wires go to each termanil on the cdi box.[/list][/code][/url]
Posted: Mon Sep 24, 2007 9:29 am
by dumdum9599
ok i realy need help now. i have the ignition wired up to the bare esentials for it to fire but it does absolutly nothing. any ideas?