Page 1 of 1
oil lines
Posted: Fri Jan 18, 2008 2:40 pm
by superpro_d
I posted an ad about changeing oil lines, I havet ben on here in awhile.
Someone sed that i should not use clear line for my oil lines, but use semi transparent poylemer lines. Can i get this at a Honda dealer??
I plan on replacing all my lines oil and gas.I just want to know what to ask for at the dealer.[/b]
Posted: Fri Jan 18, 2008 3:39 pm
by Kenny_McCormic
What you are looking for is called tygon tubing, if you cant find it locally upsmale sells it.
Posted: Fri Jan 18, 2008 3:49 pm
by 79vwrabbit
I like to use clear lines for my oil lines so I can watch the oil being fed to my engine, especially the line from the pump to the manifold. I got my lines from Ace, but any decent hardware store would have them. I think I priced the OEM Honda lines for the Spree once, and they were a pretty penny.
Posted: Sun Jan 20, 2008 1:28 pm
by DrZ34
napa sells tygon in thier small engine book/ marine catalog.
http://www.napaonline.com/NOLViewer/Pag ... ShowPics=1
and the price is for the WHOLE ROLL . but they will sell you it by the ft.
Posted: Mon Jan 21, 2008 1:05 am
by superpro_d
ok thank you i will check on that maby this week, i need to get going on this project and get this thing running.