Honda Spree and Elite 50 Forums

Posted: **Thu Feb 28, 2008 9:18 am**

if a person puts a molossi build together "70cc" not a chamber pipe, but a performance pipe, and stock carb,also stock airbox, modded, what would the differance be if it was built with a larger intak,e and carb plus the good pipe. will run 9;1 gears also. power wise and mph..
thanks Happy

Posted: **Thu Mar 06, 2008 6:11 am**

you have the parts, put it together and if it blows i will tell you why

Posted: **Thu Mar 06, 2008 10:15 am**

[quote="stillspeeding"]you have the parts, put it together and if it blows i will tell you why

[/quote

i gave kiaoni a call before he shippe dmy stuff and a he said a 844 gear will be good. i hope so i thought the 9.0 gear was not going to be real good.. but you say i need even more? i realize the carb is a bit small but i think i can get fuel to the motor to keep it from blowing.. i don;t hold the throttle wide open but i will cruise or try to at say 50 mph, not sure how fast this thig wil run with the 8.44 gear but kaioni says it should be at least 65. i guess i wil find out i have a long break in ahead of me on two scooters , i don't like that having to baby then it takes forever to get 400 mile on them

Posted: **Thu Mar 06, 2008 10:25 am**

dont really mind this dude to much. He gets on here and talks trash.

A few people say he knows what he is talking about, but all he ever does now is post useless comments and does allot of these "

"

Posted: **Thu Mar 06, 2008 12:00 pm**

Dac wrote:dont really mind this dude to much. He gets on here and talks trash.

A few people say he knows what he is talking about, but all he ever does now is post useless comments and does allot of these " "

well i am open to suggestions.. i am not even familar with the honda elite. i know one thing though. whe your doing two of the at once and going through them its a pile of money. you have see wha ti am building so i am all ears. or eyes here . its all in fun.

Posted: **Thu Mar 06, 2008 12:17 pm**

stillspeeding wrote:you have the parts, put it together and if it blows i will tell you why

i cannot imagine the people at VT steering a person wrong on a simple build!!?they are very easy to talk to and understanding of what i am trying to achieve. its a very pleasant experiance to talk to them and i gain more insight on the build and what to expect from it.. i wil say that i wan tto do a biffer card and intake but i don't want huge 28 mm setup and i still want to untilize the oil pump the 18mm-maybe 20mm setup should work fine. i know it does on my kymco running 19 mm. cannot imagine there is that much differance. anyway all info is welcome.. thanks Happy