Honda Spree and Elite 50 Forums

my turn signals all light up so the bulbs mustbe good they just dont blink any help on that please thanks Mark

Probably something wrong with your turn signal relay switch or maybe something in your switch by the handlebars. Electrical problems cac be a real pain to track down.Check the wiring from your handlebar switch all the way back and see if everything is connected.

its ur relay man, i had same problem when i first got my spree running.

the problem fixed itself and after like 2 wks, when i just noticed my blinkers actually start blinking. 8O lol

just try to tap ur relay (located on right side of spree, left oil and gas tank) and see if the blinkers blink at all. you can try opening it and cleanin up the connections on it too, but that wont necessarily fix anything, but worth a shot. i messed with mine whenever it would go out, and it would eventually start working again .

yeah, it can probably be cleaned.i have had to clean my starter relay before.

tHANKS FOR THE HELP

iJUST CALLED MY HONDA DEALER HERE IN TOWN FOR THE TURN SINGAL RELAY AND BOY IS IT BIG BUCKS $36.00 AND HAD TO BE ORDERED SO I'M GOING TO THE AUTO ZONE TO GET 1 FOR A CAR IT'S THE SAME THING AND ONLY A 1.99 I LET YOU KNOW THE OUT COME OF IT

prostreet wrote:iJUST CALLED MY HONDA DEALER HERE IN TOWN FOR THE TURN SINGAL RELAY AND BOY IS IT BIG BUCKS $36.00 AND HAD TO BE ORDERED SO I'M GOING TO THE AUTO ZONE TO GET 1 FOR A CAR IT'S THE SAME THING AND ONLY A 1.99 I LET YOU KNOW THE OUT COME OF IT

that would be pretty interesting if it turns out to work. keep us posted.

the flaser unit with a 2 post plug in is what i got it's round and was a $1.36 from advace auto works likeb a new one $36.00 from honda come on get real LOL little by little my memorry is return after i had a brain injurey thank god

Yep they work, put one in my Spree a long time ago. Works just fine. You might have to add a female quick disconect connector on the wires to plug on to the relay. But nothing to it.