Page 1 of 1
Clicker for the turn signals?
Posted: Thu Jun 05, 2008 9:37 am
by Scooterspal
The turn signal has no audible sound to it and I'd like to add one. I can wire up a simple buzzer from Radio Shack but some type of clicker would be ideal.
Was there a kit for this or a third party source someone can recommend?
Thanks
Posted: Thu Jun 05, 2008 9:47 am
by dr.ona
I had a blinker relay go out. I bought an aftermarket car blinker relay from NAPA for about $3 bucks. The clicking is loud. I would try that first.
Robert
Posted: Tue Jun 10, 2008 12:59 pm
by Curly
The old VW bug flashers were loud as *, you could try that.
-Curly
Posted: Tue Jun 10, 2008 4:08 pm
by Scooterspal
I now know why I cannot hear the flasher even though it is clicking. The darn thing is in the back under the seat... near the motor or all places.
Posted: Tue Jun 10, 2008 4:11 pm
by CharlotteSpreeRider
In the 1987 Spree it got moved right behind the headlight.
-aseigler
Posted: Tue Jun 10, 2008 4:45 pm
by Scooterspal
Well, I'd probably here it there. Makes sense to be up front. I can probably wire up something to do the trick. Just a small beeper across the indicator lamp on the panel should work.
Posted: Thu Jun 12, 2008 12:56 pm
by Clivester
You may find this link useful. Its meant for chinese scooters, but the principles are the same:
http://www.oregonvintage.com/Buzzers.pdf
Clive
Posted: Thu Jun 12, 2008 2:12 pm
by mopedman
hey that might actaly work, personally i don't use turn signals i use hand signals