Page 1 of 1
Is a top speed of 30mph too slow for derestricted 95 elite?
Posted: Wed Jun 11, 2008 1:48 pm
by gobucks
Just wondering, is 30mph (top speed) too slow for derestricted 95 elite?
Posted: Wed Jun 11, 2008 2:30 pm
by Kenny_McCormic
What has been derestricted?
Posted: Wed Jun 11, 2008 3:06 pm
by Elite1998
If you drilled out the washer in the muffler and took the plate off of the back of the variator, yes, that is a bit slow.
If you've done both, it may be because of a worn out belt
Posted: Wed Jun 11, 2008 3:19 pm
by Kenny_McCormic
Full de restriction is removing variator plate, removing exhaust washer and drilling 2 baffles form exhaust muffler.
Posted: Wed Jun 11, 2008 6:02 pm
by gobucks
yea i removed the variatior plate and ground out the washer, but havent done the drilling of the exhaust baffles, will this make a big difference, also i was going to get a 1/2 inch auto belt, should this help?
Posted: Wed Jun 11, 2008 8:17 pm
by Kenny_McCormic
The 1/2 inch belt mod is for the sprees fixed gear trans it wouldnt help anything with a front variator (such as your elite). Exhaust mod helps everything a little.
Posted: Thu Jun 12, 2008 2:52 pm
by gobucks
so on my elite i shouldn't do anything to it?
Posted: Thu Jun 12, 2008 3:11 pm
by Kenny_McCormic
A belt will not help.
Posted: Fri Jun 13, 2008 3:19 am
by stillspeeding
Never drill holes in the pipe, take off the air filter cover and cut out the plugged side of the intake, main jet goes to either 85 or 88, gear ratio can go either 10 to 1 or 9 to 1 this is according to my 1994 notes.
Posted: Fri Jun 13, 2008 10:31 am
by Kenny_McCormic
stillspeeding wrote:Never drill holes in the pipe, take off the air filter cover and cut out the plugged side of the intake, main jet goes to either 85 or 88, gear ratio can go either 10 to 1 or 9 to 1 this is according to my 1994 notes.
Never derestrict a pipe? Something that has been probven to help performance?
Posted: Fri Jun 13, 2008 10:33 am
by mopedman
yea for real