Page 1 of 1
oil and Govenor
Posted: Sat Jun 04, 2005 8:05 pm
by spreefreak
Any body know how to adjust the oil intake on an 1984 Iowa Honda Spree
Also would you know how to remove the govenor to make it go faster.
If the oil pump is pre set then why would i be getting such a white exhaust
(Know how to supe up, suggestions)
Posted: Sat Jun 04, 2005 9:49 pm
by vette76
there is no govoner.
Posted: Sun Jun 05, 2005 12:24 am
by darat
the oil pump is pre set cant change it
Posted: Wed Jun 15, 2005 8:06 pm
by matt
You dont want to do to much to it since the brakes, trans, and tires where only made to do 30. but you can mess with the exuast.
Posted: Wed Aug 10, 2005 10:06 pm
by spreefreak
ok what can i do with the exhaust
Posted: Wed Aug 10, 2005 10:15 pm
by vette76
the exhaust in an iowa has a washer welded into the head pipe. you will see it when the exhaust is removed. drill or grind it out. you might have to do a jet change also.should be a #65. not sure what an iowa has but im sure it isnt a 65 because of the restriction.
Posted: Sat Aug 13, 2005 10:13 pm
by spreefreak
would i have to replace the jets are they expensive
Posted: Sat Aug 13, 2005 11:05 pm
by vette76
u would have to change the jet if it isnt a #65. it should be stamped on it. jets are like $3 at a honda dealership.
Posted: Sun Aug 14, 2005 10:03 am
by spreefreak
alright i will have to look into that