blown piston & cylinder

brad_659 · Post by **brad_659** » Wed Jul 30, 2008 11:19 am

its all screwed...it was locked up and when i pulled it apart the rings were fused to the piston and it was all gashed up so needless to say i need a new piston and cylinder....i was told by a friend that a big enough honda powersports dealer should be able to get me what i need...or does anyone know where else to find one...the for sale section here in the forum is a little picked over for pistons....im taking offers on piston/ring/cylinder full set-ups if you have one......so if anyone has any way to help me get my spree back on the road then let me know.

keithw · Post by **keithw** » Wed Jul 30, 2008 11:31 am

Check ebay or uspmale on this forum. Uspmale sells used bits and is good to deal with.

keithw

my4sons · Post by **my4sons** » Wed Aug 13, 2008 1:42 pm

I have a freshly honed cylnder off an 89 sb50p if that would work for you. I'd buy new piston/rings, worth the $50 if would cost.

Kenny_McCormic · Post by **Kenny_McCormic** » Wed Aug 13, 2008 2:12 pm

brad_659 wrote:its all screwed...it was locked up and when i pulled it apart the rings were fused to the piston and it was all gashed up so needless to say i need a new piston and cylinder....i was told by a friend that a big enough honda powersports dealer should be able to get me what i need...or does anyone know where else to find one...the for sale section here in the forum is a little picked over for pistons....im taking offers on piston/ring/cylinder full set-ups if you have one......so if anyone has any way to help me get my spree back on the road then let me know.

Year? model?

brad_659 · Post by **brad_659** » Wed Aug 13, 2008 3:31 pm

got everything...thanks though

Honda Spree and Elite 50 Forums

blown piston & cylinder

blown piston & cylinder

Re: blown piston & cylinder