Page 1 of 1
blown piston & cylinder
Posted: Wed Jul 30, 2008 11:19 am
by brad_659
its all screwed...it was locked up and when i pulled it apart the rings were fused to the piston and it was all gashed up so needless to say i need a new piston and cylinder....i was told by a friend that a big enough honda powersports dealer should be able to get me what i need...or does anyone know where else to find one...the for sale section here in the forum is a little picked over for pistons....im taking offers on piston/ring/cylinder full set-ups if you have one......so if anyone has any way to help me get my spree back on the road then let me know.
Posted: Wed Jul 30, 2008 11:31 am
by keithw
Check ebay or uspmale on this forum. Uspmale sells used bits and is good to deal with.
keithw
Posted: Wed Aug 13, 2008 1:42 pm
by my4sons
I have a freshly honed cylnder off an 89 sb50p if that would work for you. I'd buy new piston/rings, worth the $50 if would cost.
Re: blown piston & cylinder
Posted: Wed Aug 13, 2008 2:12 pm
by Kenny_McCormic
brad_659 wrote:its all screwed...it was locked up and when i pulled it apart the rings were fused to the piston and it was all gashed up so needless to say i need a new piston and cylinder....i was told by a friend that a big enough honda powersports dealer should be able to get me what i need...or does anyone know where else to find one...the for sale section here in the forum is a little picked over for pistons....im taking offers on piston/ring/cylinder full set-ups if you have one......so if anyone has any way to help me get my spree back on the road then let me know.
Year? model?
Posted: Wed Aug 13, 2008 3:31 pm
by brad_659
got everything...thanks though