ZX or SEF Ramps? What's the difference?

Elite-ist · Post by **Elite-ist** » Tue Aug 19, 2008 12:13 am

That about covers it! I was told a SEF is better for a highly modded engine... Why is that? Any anecdotal evidence concerning durability comparisons? I think I am going to go with a Keli pulley if that makes any difference.

Kenny_McCormic · Post by **Kenny_McCormic** » Wed Aug 20, 2008 2:55 pm

Call VT

DELETED · Post by **DELETED** » Fri Aug 29, 2008 11:19 pm

DELETED

Kenny_McCormic · Post by **Kenny_McCormic** » Fri Aug 29, 2008 11:31 pm

sherlock12 wrote:Powerleveling

WHY US?????????

ALOW1 · Post by **ALOW1** » Sat Aug 30, 2008 2:00 am

Because its a PhpBB forum. I own and operate one too and have the same problems as well as know of several others that have spam problems.

But anyways back to topic. I was going to start a new topic but I might as well ask here if the poster does not mind.

I see the Keli variators come with the rollers but no ramp plate so you need to use the stock ramp plate. Can I use a different ramp plate then a stock one with the Keli, if that makes sense?

evilone · Post by **evilone** » Sun Aug 31, 2008 2:58 pm

My Keli variator came with ramp. From VTCycles.

ALOW1 · Post by **ALOW1** » Mon Sep 01, 2008 2:17 am

evilone wrote:My Keli variator came with ramp. From VTCycles.

Strange, I asked Daywot if his Keli variators came with a ramp plate and he told me no, He said it was designed to be used with the factory ramp plate.

After him telling me that, I wondered if you could use an aftermarket variator, and an after market ramp plate to gain a little more top end by pushing the belt up even more. I dont know how high up the belt goes on an after market variator so it was just a thought I was having.

ALOW1 · Post by **ALOW1** » Mon Sep 01, 2008 2:19 am

ALOW1 wrote:
evilone wrote:My Keli variator came with ramp. From VTCycles.
Strange, I asked Daywot if his Keli variators came with a ramp plate and he told me no, He said it was designed to be used with the factory ramp plate.

After him telling me that, I wondered if you could use an aftermarket variator, and an after market ramp plate to gain a little more top end by pushing the belt up even more. I dont know how high up the belt goes on an after market variator so it was just a thought I was having.

Heres the message I got through eBay:

Hi, thanks for your interest. This variator does not come with a ramp plate. It is designed to be used with your factory ramp plate.

Patrick

- daywot

Did this answer your question? If not, let the seller know.

Item and user details
Item Title: Speed Variator SCOOTER ELITE DIO SA50 SR50 SE50 NB50 !!
Item Number: 330247375744
Item URL: http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0247375744
End Date: Aug-24-08 14:47:29 PDT
From User:
daywot (1497)
99.1% Positive Feedback
Member since Aug-30-00 in United States
Location: HI, United States

So is there more than one Keli variator for the 94-01 Elite's?

burnt_toast · Post by **burnt_toast** » Mon Sep 01, 2008 10:51 am

keli vari should come with matching back plate, stock one is not the same and I would doubt it would work the same.

Probably states that so you buy the matching keli plate separately and spend more money.. just a guess

SEF ramp is supposed to have better angles

Clivester · Post by **Clivester** » Tue Sep 02, 2008 6:07 pm

The Keli pulley I got came with original stock packaging and included weights but no ramp. I understand they are packaged seperately.

Clive.

Elite-ist · Post by **Elite-ist** » Fri Sep 05, 2008 12:53 pm

ALOW1 wrote:Because its a PhpBB forum. I own and operate one too and have the same problems as well as know of several others that have spam problems.

But anyways back to topic. I was going to start a new topic but I might as well ask here if the poster does not mind.

I see the Keli variators come with the rollers but no ramp plate so you need to use the stock ramp plate. Can I use a different ramp plate then a stock one with the Keli, if that makes sense?

Yes - they told me to use a "zx" type or an "SEF" type.

Elite-ist · Post by **Elite-ist** » Fri Sep 05, 2008 12:56 pm

burnt_toast wrote:
SEF ramp is supposed to have better angles

Do you think this would work even a tiny bit better than a zx on a gear modded -but not engine modded - SA50 with a Keli pulley?

maddog · Post by **maddog** » Fri Sep 05, 2008 8:04 pm

I did verify with another shop that the kelli pulleys no longer come with ramps so its sef or daytona #3 ramp and it will give you more top end if your scoot is properly derestricted.

ALOW1 · Post by **ALOW1** » Sat Sep 06, 2008 12:10 am

Seem's to me that I will be better off going with a different brand than Keli. How are those Prodigy variators?

evilone · Post by **evilone** » Sat Sep 06, 2008 10:53 am

I guess I got one of the few Keli's that came with ramp plate, I made sure from Keoni since I had the restricted ramp on my 87 Elite. I saw Daywot's Keli Variator and it was in identical package as the one I recieved from VTCycles. Daywot also told me his is designed to use stock ramp and he has ramps for $10. Sucks for any se50P owners!

Honda Spree and Elite 50 Forums

ZX or SEF Ramps? What's the difference?

ZX or SEF Ramps? What's the difference?

warhammer cdkey

Re: warhammer cdkey

Re: warhammer cdkey

Re: warhammer cdkey