Honda Spree and Elite 50 Forums

Since i figure not much of you go into the hawaii forums, You guys might be interested in reading this.

Originally Posted by elites120ccjdm View Post
98 elite s
125cc stroked
28mm carb CT crome mani
Tecnigas R pipe (wich is * for this setup and holding me back)
Racing C.D.I unit
Port and polished block
Racing 52.6mm crank
Ported and polished cylinder
Port and polished intake manifold
In need of a pipe!!pg phatty or the pipe that true72 hason his drag bike...
She toped out at 102mph


I got 9:1 gears...and yess 102 MPH!!I'm telling you because I got stoped by a * cop on the highway...I was riding with an R6...loL...the cop pulled me over nd said..."u know what..?I'm not even going to give u a ticket...1st time I see a moped hitting 100 MPH...and my friend on the R6 was telling me I was hitting 100 mph..kus his speedo was on 100 mph..I weigh 140..I'm 16..and I BUILT MY MOTOR...I'm dominican dude..go on youtube...and check it out...and yeahh I'm selling the pipe...I want a PG PHATYY!! I have a 125cc setup..I have a s*** load of parts I am willing to trade for a PG PHATTY!

enjoy...

I'm still waiting for his crank to explode.

just dream 102mph?

the motor displacement size cc doesnt ment to go by the speed

get real! well how much work port and spent money on motor, How much you can afford to go fast!

The key fact is all about how motor tunes, rider weight, and kind of moped ride..

dam i wounder where he got this kit. all of us in the island spending the load of money on fm part and porting the bore and all that. You should just all go buy the Taiwan bore so we all can go 102 chea chea. he stay runing one pipe for 72 image if we put the stroker pipes and over sized mani bigger carb we would be going like 150 .

eight08boy wrote:dam i wounder where he got this kit. all of us in the island spending the load of money on fm part and porting the bore and all that. You should just all go buy the Taiwan bore so we all can go 102 chea chea. he stay runing one pipe for 72 image if we put the stroker pipes and over sized mani bigger carb we would be going like 150 .

you get the point of this topic right?

wrong gear ratio for that bore, tell us some more B.S.

sounds like someone on this forum??????

Ok dudes...wait till I fix my kick starter ima take it on the highway and record my run..and well see who are the ones who are going over 100...y don't u guy belive me?ahh..w.e.ima make the vid and post it up asap.

We don't believe it because its not true.. No chance that you're hitting that speed with a basic Taiwan stroker setup and NextR

You got a decent setup but dont try to fool yourself

Takes time and skill to go those speeds, with the right parts. Lets see the vid

Huh. How fast would the motor have to be turning with the variator all the way out, and 9:1 gears, to get over 100MPH?

You would have to be spinning 16,000 RPM to reach that speed.

Kenny_McCormic wrote:You would have to be spinning 16,000 RPM to reach that speed.

That's kind of what I thought. That's a pretty optimistic RPM to be running a stroker engine of any stripe.

Kenny_McCormic wrote:You would have to be spinning 16,000 RPM to reach that speed.

What is the formula that was used to figure this out?

Rough calculation, stock elite motor cranks ~8k, with a pulley kit and 9:1 gears they go 50-55.

Meaning that with 9:1 gears you would need to be spinning somewhere in the neighborhood of 16,000 RPM to make 100mph. He might hit 100 with 5:1