Honda Spree and Elite 50 Forums

I JUST REPLACED MY 86 DRIVE BELT (HONDA MATIC BY BANDO 23100 -GK8-8700) WITH AN AC DELCO BELT 15250 88934265 @ $13.00. THE SIZE IS 3/8 X 25 5/8, AN OBSCURE SIZE FOR SURE. I WENT TO A REAL AUTOMOTIVE WAREHOUSE/STORE WHO HAD THE BELT IN STOCK. I DOUBT ANYONE WILL HAVE MUCH LUCK AT ANY PLACE OTHER THAN A NAPA STORE.

3/8 IS WAY TOO THIN, YOU WANT 1/2"

The belt that came off measures 3/8.

Its was worn out, service limit is 10.5 mm (.41 inches) 3/8 is .375 inches.