Page 1 of 1
spree cdi
Posted: Sat Mar 14, 2009 1:38 pm
by maxiped77
Any one know how to test the cdi box on a 86 spree? Already tested the cdi plug for the coils, but did'nt see any thing in the manual or any post on testing the box it self. Any help on what terminals? thanks
Posted: Sat Mar 14, 2009 2:39 pm
by Kenny_McCormic
When you spin the engine over does it get power and put power to the coil?
Posted: Sat Mar 14, 2009 2:49 pm
by maxiped77
if you mean the stator lead, the oms tested out good. not sure how to test this with the motor spinning? meter in volts, or auto tester w/ light?
Posted: Sat Mar 14, 2009 3:09 pm
by mousewheels
I recall the Spree manual does not have CDI tests, but the Aero/Elite manuals do. Try downloading them.
Posted: Sat Mar 14, 2009 8:52 pm
by Kenny_McCormic
I would use a volt meter, if the stator is getting voltage and the coil is getting voltage you are probably fine. What makes you suspect the CDI is bad?