Page 1 of 1
feul gage
Posted: Sat Aug 13, 2005 9:37 pm
by spreefreak
my feul gage isnt working could it be because the turning signals in the front are not hooked up could this be the problem.
Posted: Sat Aug 13, 2005 9:50 pm
by vette76
not even close. check the wires near the fuel sender for corrosion.
Posted: Sat Aug 13, 2005 10:11 pm
by spreefreak
how do i replace thos wire would i need to drain the gas tank to do anything
Posted: Sat Aug 13, 2005 11:04 pm
by vette76
no. i suggest you have someone look at it that knows about wiring. test it with a multimeter.
Posted: Sun Aug 14, 2005 10:00 am
by spreefreak
thanks
Posted: Sun Aug 14, 2005 8:08 pm
by deathwish
my gauge wasnt working either but when i cleaned my tank i took it out and turn the scooter on and played with it and it started to work
Posted: Sun Aug 14, 2005 10:08 pm
by burnt_toast
first take out the fuel meter itself (unscrew from the tank) and make sure it's ok. I'm missing the float part so its never worked for me.
Posted: Mon Aug 15, 2005 11:54 am
by spreefreak
great suggestions i'll have to look into that